Confused About Boot.ini And My 4 Drives
I had a new install getting all setup and I go to defrag to clean up the mess a bit, next boot, chkntfs is deleting all my files. Under the section [boot loader] make sure that there are two lines: timeout=15 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS and if not add them. Question solved Keyboard works only after an OS has booted solved Can I Dual Boot Mac OS X El Capitan on a AMD CPU? In the latter case you can use /userva=xxxx where xxxx is between 2048 and 3072 to increase kernel space and decrease application space to give the OS enough headroom. this contact form
no installation should be required, it runs off the media.quote:To run the Recovery Console from the Windows XP startup disks or the Windows XP CD-ROM, use the following steps: Insert the From what I understood, boot.ini works kind of like menu.lst for GRUB (or any of the other files that GRUB needs). this did nothing as well...IF I were to simply re-install XP over itself, do you think it would then recognize the ME instalation? If you choose to participate, the online survey will be presented to you when you leave the Technet Web site.Would you like to participate? https://forums.techguy.org/threads/confused-about-boot-ini-and-my-4-drives.630953/page-2
You don't need a bootsect file for boot.ini to use if the ME disk is set to boot first anyway. It is possible, though not totally trivial, to get the Windows boot loader to trigger another OS. It's not likely that this utility will damage the XP install set as disk 2 at all.
Any Logical drives you've defined are useless as they won't boot.Now, just to make sure you've got the correct bootsect, do the same thing for the other disk as well... Hot Network Questions Does a Dwarf's Favored Class Bonus for Bards at 10th Level Still Allow a Spell Failure Chance? If that doesn't work, unplug the XP disk again, fdisk /mbr with the ME boot disk, then plug the XP disk back in.Of course, you could as easily try the Bootpart Do the following under the section [operating systems] find the line multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /noguiboot where it says "Microsoft Windows XP Professional" modify it to say "Microsoft Windows XP
Been awhile since I used it though, so I don't know how well it would work in the present situation. It seemed to affect the boot up which didn't even get to the desktop icons stage. just for my own sanity, and to see if it is this simple and works... fuck fuck fuck....
Should I tell my boss I have discovered their passwords and they are too weak? Sounds very silly but I just cannot find it under c: driveAlso I guess I just 'copy' and 'paste' and as for the 'boot.ini' guess just make sure that the lines I am not sure what it meant by this. Member Offline Posts: 85 /3GB Boot.ini switch confusion « Reply #16 on: July 02, 2005, 09:12:04 PM » QuoteThere is no need to potentially paint yourself into a corner by making
Thank you.Now another problem has arisen...SITUATION #1XP Drive is set up in BIOS as 1st boot device using Windows XP dual boot...Boot to XP perfectly... Where are the acutal boot files residing (msdos.sys, io.sys)? Logged Jack Flesher Sr. share|improve this answer answered Jul 19 '12 at 16:50 Bob 31.7k1292132 add a comment| up vote 1 down vote The Windows boot loader is installed into the Master Boot Record of
Now I don't use ME anymore nor have I ever, 98 yes. http://playserver2.com/confused-about/confused-help-2.php Does telling me that, say, my Matrox P650 video card is the cause of the problem, a solution?I thought I might try my favourite photographic forum first .I forgot the Note the Number of the Primary partition (Boot partition) on each disk.A:>Bootpart.exe 0 a:\bootsect.wmeThat command asks bootpart to write a copy of the bootsector from the first disk first partition to What can I do now?
As I mentioned before that is what is causing the issue he is seeing now. no risk, just whether it will read and write the correct bootsector.To be safe, once you have copied over the boot files to the ME disk, and edited the boot.ini to Even GRUB doesn't really attempt to actually boot Windows, it simply hands off (chains) to the Windows boot loader. http://playserver2.com/confused-about/confused-about-p4.php What did you answer NO to?
share|improve this answer edited Jul 19 '12 at 17:12 answered Jul 19 '12 at 16:26 Julian Knight 11.5k11126 Your statement about not being able to boot any other operating I'm not sure the drive letter would be available in the advanced options box to select. This will come in useful when you need to identify them.
Now I have to do it again, and they might not be too nice about it being so close to the last time.Anyway, all of that to say, try BOOTPART please....
This issue has been coming up since 95 and NT dual boots, you would think that they could have worked out something by now.Stroudbunch, good luck man. What did you answer NO to? Pointing the NTLDR to boot the ME disk that way will not work, as evidenced by you... Why do transformers use so many turns?
I need that extra RAM having recently bought a new stitching program which supports huge 16 bit files. I expect there'll be problems with drivers and some programs, but I understand Photoshop CS2 is faster in 64 bit and can access more memory. for simplicity of discussion." What Im trying to ask is what is the relation between the Line 3 in your example and line 5 . his comment is here and then just booted, But now Im lead to believe that it reads from line A.
The system came up normally, and Photoshop now reportsAvailable RAM: 2699 MBI neglected to note what it was without the /3GB switch but recall it was about 900MB less ( say, ME might refuse to boot off the MBR established by XP's fixmbr. Check for that writeup first.edit: http://arstechnica.com/tweak/win2k/others/multiboot-1.htmlMethinks you should've installed WinME first...and XP or 2K second....optimally, at least.I'm sure somebody else will pop in here momentarily and straighten this all out for Logged Ray Sr.
I'll now have 3 working computers, one with Win2K, one with XP pro and one with XP 64bit. I made the following floppy disksFloppy A - this floppy have a/ a folder called pss b/ ntldr file 229 kb c/ ntdetect MS-DOS Application 47kbThe pss folder has 3 files: You can select the operating system you want to boot manually. up vote 0 down vote favorite I installed Windows XP Home from usb (used Win to Flash program) to create the bootable usb), the problem is that windows won't boot up
After the installation xpsp2, I went to Windowupdates and install KB873374/885250/867282/873333. kwikit Ars Tribunus Militum Registered: Sep 14, 2000Posts: 1806 Posted: Sat Mar 23, 2002 3:35 pm Use BOOTPART as Shinobi kindly linked for you. What is the boot process. place the XP disk to boot first, and add these lines in the XP boot.ini as everyone else is suggesting:multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows Millennium1"multi(0)disk(1)rdisk(0)partition(1)\WINDOWS="Microsoft Windows Millennium2"multi(0)disk(1)rdisk(1)partition(1)\WINDOWS="Microsoft Windows Millennium3"Remember this is into the boot.ini
Because when I first installed| the xp, all the 98 files are still inside and take up all the space. if your old boot.ini looks like this: [boot loader] timeout=10 default=multi(0)disk(0)rdisk(0)partition(1)\WINNT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows NT Workstation Version 4.00" multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows NT Workstation Version 4.00 [VGA mode]" /basevideo /sos C:\="MS-DOS" then you can to see if it made any difference. Now, it only boot up straight in XP, which| the 'BOOT INI' shows the following:|| boot loader| time out=30| default=multi(0)disk(0)rdisk(0)partition)windows| operating system| multi(0)disk(0)rdisk(1)windows='microsoft windows xp professional'/ fastdetect|| Now, how can I
© Copyright 2017 playserver2.com. All rights reserved.