Configure IDE And SATA Hard Drives
I have a computer that uses a SATA connected hard drive. BUT BEWARE one thing. Flag Permalink This was helpful (0) Collapse - Ahh, that never seems to work. Brian Cooley found it for you at CES 2017 in Las Vegas and the North American International Auto Show in Detroit. Check This Out
also i've updated the bios drivers and according to other forums should have stopped the Sata troubles.>ive tried setting the IDE to primary slave and cable select but none have changed It sees any other IDE drive attached, but not the HDD. I'm using the Syba product right now on a two-year-old HP Pavilion that has only SATA sockets on the motherboard. The SATA interface cable can be up to 1m long, which is an advantage in a large computer case. https://www.cnet.com/forums/discussions/mixing-sata-and-ide-drives-in-a-system-115142/
How To Connect Ide Hard Drive To Sata Motherboard
Jumpers are small black plastic sleeves that slide over the top of metal pins. share|improve this answer answered Feb 26 '10 at 15:41 Warner 48126 The drives are both detected. I assume that its flat cable will fit into the regular IDE slot of the mobo, but won't be able to share the cable of the primary SATA drive. sata hdd primary ide would like to set as secordenary drive and cd rom as slave?
Any help would be appreciated, Thanks! Attaching the IDE and power cables In fig 1.4 on the left you can see a standard IDE cable. make-use-of-logo logo-background menu search search-start close email bookmark facebook google twitter pinterest stumbleupon whatsapp amazon youtube youtube label-rectangle triangle-long down PC & Mobile Windows Mac Linux Android iPhone and iPad Internet Ide Hard Drive Jumper Settings Required fields are marked *Comment Name * Email * Tina Sieber 1009 articles Tina is a freelance writer and editor, with a background in science and sustainability.
Reply Calvin March 24, 2016 at 2:08 am Nope. Ide And Sata Drives In Same Computer The former is the same cable that IDE drives require. Then I connect the cable up, bearing in mind that the hard drive as the master should be connected to the centre of the cable, with the slave CD-ROM drive being when no jumper change ect (OS on ide HDD , SATA HDD, use of space) Can you run 2 optical ide drives and 1 dvd sata drive together solved I cant
by rbird / July 22, 2005 11:48 PM PDT In reply to: Mixing SATA and IDE drives in a system? Use Ide Drive With Sata Motherboard Can I run IDE Drives and SATA Drives Together? Ask a new question Read More Gigabyte SATA Hard Drives Seagate Motherboards Related Resources IDE hdd + IDE/SATA-USB adapter + USB hub don't work together? First check what type of interface cable your current hard drive has.
Ide And Sata Drives In Same Computer
I only noticed it because it was on the latest list and easy to get to.Think it over.Bob Flag Permalink This was helpful (0) Back to Storage forum 29 total posts current community blog chat Super User Meta Super User your communities Sign up or log in to customize your list. How To Connect Ide Hard Drive To Sata Motherboard You should have a spare IDE controller or at least a spare channel/port.If your system didn't have any spare IDE ports, then you could buy a separate IDE/ATA/ATAPI controller card that Sata And Ide Hard Drives Together It used to work but after the mobo install the bios recognized an unknown drive instead of the other hd.
Reply Darz March 19, 2016 at 3:28 pm Did you sort out your problem? his comment is here Enhanced mode device support must be set on to use a mixed device configuration. It's white and it has a female connector that goes into the 4-pin male connector on the back of the disk drive. Photo Credits Ablestock.com/AbleStock.com/Getty Images Suggest an Article Correction Related Searches More Articles [Enter Setup] | How to Enter Setup on an Acer Aspire [SATA Hard Disk] | How to Connect a Motherboard With Ide And Sata Ports
For most users this will work: Open Registry Editor and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci. I thought I should get SATA now anyways. Reply Leave a Reply Cancel reply Your email address will not be published. http://playserver2.com/hard-drive/configure-two-drives.php Please refer to our CNET Forums policies for details.
I have no idea where to set Boot Priority for a particular HD .. How To Make Ide Boot Instead Of Sata Select "Storage Configuration," "Drive Configuration," "IDE Configuration" or a similar option, if available. That mistake recognized and rectified, I still cannot figure out why XP won't load under my current setting.The BIOS settings have been set so that SATA 0 is the drive to
Another alternative is to buy an adapter card that plugs into the motherboard and has the sockets you need.
Before, the cd and dvd drives were e: and f:, the hd(when it was recognized) was still g:Not sure why it happened (I might try removing all emulation drives first and Information regarding the origin and location of the exception can be identified using the exception stack trace below. Configuring the BIOS You might not have to make any changes to the BIOS. Sata Hard Drive Power Cable Review the documentation included with your computer or motherboard for further assistance, if necessary.
The power cable can be found attached to your computer case's power supply. The image below shows what SATA (red, left) and IDE (grey, right) cables look like. Why is Trump's omission of an explicit mention of Jews from the holocaust memorial a big deal? navigate here But despite that, the bios does recognize the drives are there but I can't figure out why XP won't boot.
share|improve this answer answered Feb 26 '10 at 17:18 NoCarrier 2,45843046 add a comment| up vote 3 down vote Is the drive detected in the BIOS? Just make sure the drive you WANT to boot from is higher in priority to the wonky IDE drive.
© Copyright 2017 playserver2.com. All rights reserved.