Computer Won't Turn On After Cleaning
Don't ask us to compare or recommend products. When I did try to push the button the PC did not power up. Trusted Techs Proven-skills collaborators will have their usernames marked with a . If so, maybe I can just replace the power switch ion the box. Check This Out
No PSAs unless relevant to an issue (it must be a comment). I use tape to label the connectors and then label where each one went. I really hope this is the cause! BlackHorseman, Jul 10, 2010 #1 Sponsor crjdriver Moderator Joined: Jan 2, 2001 Messages: 34,949 You may have knocked loose one or more of the case leads ie the ones from http://www.computing.net/answers/hardware/desktop-computer-wont-start-up-after-cleaning/89230.html
Computer Won T Boot After Cleaning Cpu
Its possible, also that it might have just failed unrelatedly- these things happen. I seemed dead except you could hear it whine a bit when power on but no real indication it was working. Try testing the CPU fan to make sure it's functional, if it isn't it could prevent a POST. After I plugged in the right one, it booted up.
So I had a look inside the tower once more and this time I cleaned out the dust from within the motherboard's fan using some cotton buds (swabs), thinking that this I went in and found that my power switch wire to my motherboard was disconnected after putting it back in it started up i reconnected my side fans and as i While you're in there, look at the motherboard, it sits on 'standoffs, usually 6-9 of them that hold the motherboard off of the case, make sure it isn't touching the case Vacuuming Computer This is probably not the reason but it should have been done.Try this procedure:Unplug the PC and open it up.
centrino207 replied Feb 7, 2017 at 5:53 AM Loading... Forum Archive Cyber Tech Help Forums RSS Help Forums | Tutorials | Downloads | News | Other Resources Home | Site Help | About Us | Subscriptions | Services | Contact Get the answer jl0329Sep 1, 2011, 11:47 AM @Striker410 Thanks for the fast reply man!! http://www.tomshardware.com/answers/id-1762280/turn-inside-cleaning.html Make sure you unplug the system completely from the wall first.
Computing.Net and Purch hereby disclaim all responsibility and liability for the content of Computing.Net and its accuracy. Pc Vacuum Cleaner I hope. Be careful not to drip liquid into the computer -- a barely wet swab should work fine. Ask a new question Read More Computers CPUs Cable Related Resources solved "Your PC ran into a problem..." error after cleaning inside of PC Computer won't turn on after cleaning.
Cleaned Computer Now No Video
Its amazing how the tiniest little touch can do just enough to stop everything working. permalinkembedsavegive gold[–]Reygle 0 points1 point2 points 1 year ago(0 children)1) There is no PC speaker connected to your board. Computer Won T Boot After Cleaning Cpu Such opinions may not be accurate and they are to be used at your own risk. No Display After Cleaning Pc delluser1Sep 2, 2011, 12:36 AM Been using a compressor for years, helps save a bundle of cash when you're going into an office and cleaning out a dozen or more machines
Touching another component can discharge this electricity unnoticed, delivering a possible death blow to your computer. his comment is here It might be a wire connection issue but there is a high probability you fried the motherboard with that brush. The guide you linked was the first thing I tried. Over time, sticky residue can collect on and around the button, causing the computer to think it's being held down or pressed repeatedly when it's not. Laptop Wont Turn On After Disassembly
well gotta buy a new motherboard then. How To Clean Dust From Pc Without Compressed Air Unless reseating works : ) I'll let you know how it turns out, Daniel. I usually resolve that by reseating everything, including all power connectors, and making sure I got all the dust.
Could the fact that I didn't put any thermal paste back on be the cause of my computer not starting?
jl0329Sep 2, 2011, 11:04 AM Proximon said: You really shouldn't jump to any conclusions just yet. Outlander_04Sep 1, 2011, 12:20 PM theres a fairly decent chance that static electricity from wiping it with paper has killed some critical component Never clean the inside of a computer with All those little static discharges going off as you brush away. Pc Wont Turn On But Motherboard Light Is On Sorry for the vague information guys.
You might have to find the guide for your motherboard and read through it. No soliciting of any kind. like i click the button nothing happens no fans turn on or anything nothing boots. http://playserver2.com/turn-on/computer-will-not-turn-on.php permalinkembedsavegive gold[–]VenerableHobo[S] -1 points0 points1 point 1 year ago(1 child)Yeah, I figured now that a can of compressed air is nothing compared to potentially needing to replace a part.
computer wont turn on after cleaning solved Pc case wont fit back in with the cd/dvd drive after pulling it off for cleaning solved PC won't BOOT AFTER CLEANING Toshiba satellite You also need to make sure all the case connections are correct. I think you should do what I suggested in #2 before moving on to other possibilities as your problems arose so soon after the cleaning.Always pop back and let us know Do the same for the memory dimms and the video and sound cards if you have any.
Report • #2 Derek June 5, 2013 at 14:12:44 Usually it is because you disturbed some connection or other. Sorry for the vague information guys. Loose Cables or Hardware In the process of opening the case to get to your fans, you may have knocked something else loose. Do i need to buy a new cooler to see?I took the mobo off and checked for loose screws.
If even your RAM is loose, it could prevent proper start-up. I figured my CMOS battery was dead when I was reading the guide, so I pulled the battery. The problem might have been with the power supply, of might not, but after, the power supply was dead. Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More...
Click here to join today! striker410Sep 1, 2011, 10:18 PM Proximon said: Good suggestions. Two bytes of advice: Get yourself an old, semi-obsolete computer to experiment on. There are some lights on the mobo and GPU that turn on when i flip the switch on the PSU, but when I press the power button, it won't start up.
Hopefully, you didn't cause any physical damage to the CPU or other parts when you took it apart. This rig was built almost 3 years ago, so I am pretty happy that it's still alive (if I can fix this issue). If you would like to be considered for trusted flair, please fill out the /r/techsupport trusted status application at http://goo.gl/forms/Od6G6KFxJj . Bad RAM, a failing power supply unit and faulty motherboard can all prevent proper booting.
Loose Components All components inside the computer must communicate with each other properly to boot, and if any of these parts are loose, that communication breaks down and could send the Get the answer Gravez98Mar 22, 2015, 6:39 PM mrtissues said: Thank you for the reply.
© Copyright 2017 playserver2.com. All rights reserved.